2 Pack of 4 Way Pressure Clamps For Clamping Panels – Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers (2 four way pressure clamps)

Add to wishlistAdded to wishlistRemoved from wishlist 0

Make sure this fits by entering your model number.
Clamping panels doesn’t have to be difficult. This clamp system is designed for the sole purpose of clamping panels using pressure from the top, bottom and sides all at the same time!
Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.

$49.99 (as of August 9, 2019, 11:07 am) & FREE Shipping. Details

Style:2 Four Way Pressure Clamps

Clamping panels can no doubt be a challenge. Especially when we attempt to use on a regular basis pipe clamps or bar clamps. Whilst these kinds of clamps work relatively well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels all over glue up. If truth be told, with all of the pressure being applied on both sides, bar and pipe clamps will almost no doubt bow, buckle or rack your panel glue up project.Let’s make racked panel glue united statesthing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp deal with, all four sides of the clamp will draw inward on the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels. Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to deal with plenty of stock widths. Clamp can be utilized for boards as much as 6 inches in thickness by simply adjusting the clamp width capacity with the suitable choice of notches. Turn the deal with clockwise to tighten the clamp and turn the deal with counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock. Now you’ll optimistically glue up wide boards, shelving, table tops, and more as much as 6” thick. To setup the clamps simply attach the clamp to any length 2 x 2’s (2” x 4” ripped in half) with the the wood screws which are provided, apply wood glue to your project, set the clamps on to your panel boards and turn deal with to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp each and every 12” to 18” for best results.This clamp package comes with two full 4 way pressure clamp assemblies. It includes: 2 each and every rotating deal with assemblies, 2 each and every tailstock assemblies, 4 each and every side pressure pads, 4 each and every 4 notch bars and 4 each and every 8 notch bars.

Ensure that this fits by entering your model number.
Clamping panels doesn’t need to be difficult. This clamp system is designed for the sole purpose of clamping panels the usage of pressure from the top, bottom and sides all on the same time!
Clamping panels can no doubt be a challenge. Especially when we attempt to use on a regular basis pipe clamps or bar clamps. Whilst these kinds of clamps work relatively well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels all over glue up. If truth be told, with all of the pressure being applied on both sides, bar and pipe clamps will almost no doubt bow, buckle or rack your panel glue up project.
Let’s make racked panel glue united statesthing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp deal with, all four sides of the clamp will draw inward on the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to deal with plenty of stock widths. Clamp can be utilized for boards as much as 6 inches in thickness by simply adjusting the clamp width capacity with the suitable choice of notches. Turn the deal with clockwise to tighten the clamp and turn the deal with counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
Now you’ll optimistically glue up wide boards, shelving, table tops, and more as much as 6” thick. To setup the clamps simply attach the clamp to any length 2 x 2’s (2” x 4” ripped in half) with the the wood screws which are provided, apply wood glue to your project, set the clamps on to your panel boards and turn deal with to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp each and every 12” to 18” for best results.
This clamp package comes with two full 4 way pressure clamp assemblies. It includes: 2 each and every rotating deal with assemblies, 2 each and every tailstock assemblies, 4 each and every side pressure pads, 4 each and every 4 notch bars and 4 each and every 8 notch bars. Together, this setup will assist you to create two 4 way pressure clamps. A couple of clamp is in most cases really useful for any project over 12” in length. Wood is required for putting in the clamp. Wood is NOT included.

Specification: 2 Pack of 4 Way Pressure Clamps For Clamping Panels – Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers (2 four way pressure clamps)

Part Number

Item Weight

Package Dimensions

California residents

Item model number

Style

Finish

Material

Installation Method

Number of Handles

Handle Material

Plug Profile

Special Features

Usage

Batteries Included?

Batteries Required?

Brand

Reviews

0.0
0
0
0
0
0

Be the first to review “2 Pack of 4 Way Pressure Clamps For Clamping Panels – Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers (2 four way pressure clamps)”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Reset Password